Find Coal Feeding Equipment, Coal Industry Feeder, Plate Coal Feeder on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Coal Feeder > Belt Type Coal Feeder > Feeding Equipment Coal Industry Feeder

Feeding Equipment Coal Industry Feeder

Basic Info

Model No.: GLD1500/7.5/S

Product Description

Feeding Equipment Coal Industry Feeder

SUMMARIZE:

The driving force of belt a feeder adopts motor cycloidal needle wheel reducer, Coal Feeding Equipment which is compact in structure, stable in operation and wide in speed regulation range, and can realize stepless speed regulation. Annular rubber belt transmission, complemented by to heave tight round ring rubber belt tension device can adjust the belt elasticity adjusting and running deviation degree, by continuous coal is realized by using the annular body with different K type reciprocating coal feeder one-way to coal, greatly improve the working efficiency and link with the 16 mn alloy casting as the service life of equipment was improved and used nylon rods pin connection this structure has the very strong resistance to impact. The feeding range is large (0 ~ 500mm). This coal feeding equipment is widely used for coal feeding at the raw coal end easy to regulated,stepless speed regulation,adjustment convenient smooth and reliable operation, low noise,protect the environment maintenance of a small amount of low cost, long service life parts can be widely used ,easy installation and maintenance. can replaced other type feeders.

Coal Feeding Equipment, The driving force of belt a feeder adopts motor cycloidal needle wheel reducer, Coal Industry Feeder which is compact in structure, stable in operation and wide in speed regulation range, and Plate Coal Feeder can realize stepless speed regulation. Annular rubber belt transmission, complemented by to heave tight round ring rubber belt tension device can adjust the belt elasticity adjusting and running deviation degree, by continuous coal is realized by using the annular body with different K type reciprocating coal feeder one-way to coal, greatly improve the working efficiency and link with the 16 mn alloy casting as the service life of equipment was improved and used nylon rods pin connection this structure has the very strong resistance to impact.

How to work

The material in the material bin is placed on the belt a through the connecting section into the material guide slot. When the belt is still, the material finally stops moving due to the internal friction and forms a static accumulation at a certain Angle at the material outlet. When driving drum by the driving of the driving gear began to rotate, drives the tape movement, tape drive a belt movement, on the guide material on a belt drive the discharging mouth, running a belt to return after discharging mouth discharge, materials continuously from the discharging mouth eduction, thus completing the process of feeding; The sealing device provides sealing for materials leaking out in the gap between the guide groove and the tape. Can change quantificationally, by adjusting the speed of speed reducer hand wheel to change the output shaft speed, change the size of the belt speed to achieve, also can by adjusting the inverter frequency, change the motor speed.

Dongda Group has 10 series, more than 70 products. Including mines lifting equipment, transport equipment, communication signal equipment, personal-protective equipment, ventilation equipment, mining cleaning equipment, supporting equipment, drilling machines and accessories, mining pump, electrical equipment, lighting equipment ,rock drilling equipment and other products.coal feeder ,air cannon ,gas detector,
Now ,hundreds kinds of products have been exported to more than 60 Countries and regions. Such as USA, Australia, Russia, Canada, Middle East, Africa etc
Dongda Group has succeeded in passing a number of certification systems which are ISO9001, 2008 quality management system certification, CE certification ,Alibaba GIS certification, SGS certification (made in China) . With excellent quality and competitive price , Dongda group is to establish long-term, broader economic and trade cooperation and strategic partnership with a number of large state-owned enterprises and customers, and won the unanimous approval of them.

MAIN TECHNICAL PARAMETERS


TYPE

POWER (kw)

Max capacity (T/h)

Max belt speed (m/s)

Overall size (mm)

Weight( kg)

GLD800/5.5/S(B)

5.5

800

0.42

3280*1270*1718

3700

GLD1200/7.5/S(B)

7.5

1200

0.42

3683*1605*1868

3800

GLD2000/7.5/F(B)

7.5

2000

0.69

3268*1470*1450

4200

GLD3300/11/F(B)

11

3300

1.05

3268*1470*1950

5200

GLD4400/11/F(B)

11

4400

1.15

3370*1720*1950

6200

belt feederCoal Industry FeederCoal Feeding EquipmentPlate Coal Feeder




Contact us if you need more details on Coal Feeding Equipment. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Coal Industry Feeder、Plate Coal Feeder. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Coal Feeder > Belt Type Coal Feeder