Find Three Inch Electromagnetic Pulse Valve, Two Inch Electromagnetic Pulse Valve, Two Inch And Half Solenoid Valve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Dust Collector Fittings > Electromagnetic Pulse Valve > Submerged and Dedusting Solenoid Valve

Submerged and Dedusting Solenoid Valve

Basic Info

Model No.: Customized

Product Description

The Solenoid Valve is divided into the intake electromagnetic valve and the intake solenoid valve. In fact, the principle is the same, but the medium is different.
The solenoid valve is a large type. The Pulse Valve is one of the kinds. It can be called the electromagnetic pulse valve. The pulse valve can open the valve by one time. It does not need continuous electricity and closes the valve after the power break.
Its valve voltage is relatively small, one is DC voltage, 6V/12V24V.
1, pulse valve: by gas flow through gas resistance, gas capacity delay, the input long signal into the pulse signal valve type valve is controlled by a pilot valve such as electromagnetic or pneumatic, and can start and close a high pressure gas source to produce a pulse valve.
2, electromagnetic pulse valve: refers to the combination of solenoid valve, pilot valve and pulse valve, directly controlled by the electrical signal diaphragm valve.
Low pressure right angle solenoid valve
Working conditions:
When the electromagnetic pulse valve is used, the environmental conditions are very important, which is related to the normal and smooth operation of the electromagnetic pulse valve. The environment conditions of the electromagnetic pulse valve:
1, according to the type of power supply, AC and DC Solenoid Valves are selected respectively. Generally speaking, AC power supply is convenient to use.
2, in corrosive or explosive environments, corrosion resistance should be preferred according to safety requirements.
3, if the environment space is restricted, please use the multi-function solenoid valve, because it eliminates bypass and three manual valves and is convenient for online maintenance.
4, the power supply voltage fluctuations usually AC +%10%.-15%, DC tolerance of about%10, if ultra poor, must take measures to stabilize or put special order requirements.

5, the highest and minimum temperature of the environment should be selected within the allowable range. If there is excess deviation, special orders should be put forward.

Submerged electromagnetic pulse valve

6, the power condition of the electromagnetic pulse valve
7, special occasions such as vibration, bump and impact should be selected in the environment, such as marine solenoid valves.
8, voltage specifications are preferred to AC220V.DC24V.
9, in the environment where relative humidity is high and water droplets are dripping, we should choose waterproof solenoid valves.

10, the rated current and power consumption should be selected according to the power supply capacity. Attention should be paid to the higher VA value when AC starting, and the indirect guided solenoid valve should be preferred when the capacity is insufficient.

Solenoid valve pneumatic diaphragm valve

Contact us if you need more details on Three Inch Electromagnetic Pulse Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Two Inch Electromagnetic Pulse Valve、Two Inch and Half Solenoid Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Dust Collector Fittings > Electromagnetic Pulse Valve