Pneumatic Fitting YPB8-02

Model NO.: YPB series fitting Pressure Range: 0~0.8mpa Resistant Pressure: 1.5mpa Trademark: STNC Origin: China Air Tube: PU or Pa Applicable Temperature Range: -10~60 Celsius Degree(No Freeze) Medium: Air Specification: ISO9001: 2008 HS Code: 3917400000 1. INSTRUCTION 1: Never try to pulled, convoluted, curled by adding another strength, otherwise the fitting maybe be damaged. 2: The fitting will be damaged because of hot and the function of water break up, when the medium temperature over than 60 celsius degree. 3: Never use other medium except water and air. 2. Notice when fix the tube 1: Check is there any surface hurtedor distortion to be ellipse. 2: The tube should touch the bottom of the fitting when fixed, or it may be leads to leak. 3: Make sure the tube can't be pushed out when fixed up. (Never use excess strength, or it the fitting will be destroyed) 4: When releaseing the tubes, please note. 5. Before releasing the tube, please ensure that the pressure to zero. Press the releasing ring to the end uniform, and pull out the tubes, if not completely push in the ring, the tubes could not be pulled our or damaged the tube, and tube scraps will remaind in inner tube, resulting in the possible of leakage. 6: While Assembly tube, the outer diameter of the tube shall meet the requirement of tolerance. 7: Nylon (PA)specification 4.6.8.10 in the range -0.08mm-+0.08mm, specification 12 in the range -0.1mm-+0.1mm, PU specification 4.6.8 in the range-0.1mm-+0.1mm, and specification 10.12 in the range -0.15mm-+0.15mm

Serial Number	4	6	8	10	12
Caliber	4	6	8	10	12
Serial Number	M5	M6	M8	M10	M12	M12A	M16
Size	M5*0.8	M6*1	M8*1	M10*1	M12*1.25	M12*1.5	M16*1.5
Serial Number	01	02	03	04
Size	R1/8	R1/4	R3/8	R1/2
Serial Number	G01	G02	G03	G04
Size	G1/8	G1/4	G3/8	G1/2

Contact us if you need more details on Pneumatic Fitting. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Penumatic Fitting、Quick Coupler. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Pneumatic Fitting